AugAnchor – The Best Sandbar Anchor for Boats
Made in the USA • Rust-Proof • Auger-Style Holding Power
AugAnchor is the ultimate shallow-water anchor designed for sandbar days. Made from glass-reinforced, UV-stabilized plastics, and marine-grade polycarbonate with stainless-steel hardware, it’s rugged, buoyant, and built to last. Each set includes two neutrally buoyant / floating augers and one versatile handle—perfect for anchoring your boat, jet ski, or PWC quickly and securely.
Why Boaters Love It
-
Superior Holding Power
The auger-style design screws deep into soft sand, providing a hold that spike and slide anchors can’t match. -
Rust-Proof & UV-Resistant
Polycarbonate Glass Reinforced Auger construction with stainless hardware ensures zero corrosion—no more rust stains or weakened anchors. -
Lightweight & Floats
Easy to handle and retrieve—the AugAnchor is neutrally buoyant and will partially float so you do not need to go underwater to find it if dropped. -
Fast, Tool-Free Setup
Just twist in and tie off—that’s it. No wrenches, no hammers, no hassle. -
Sandbar-Friendly & Eco-Safe
Won’t damage the bottom or rip up vegetation—perfect for beaches and fragile sand flats or springs. Plus, it saves your toes from finding your traditional anchors under the water the hard way. -
Versatile Performance
Suitable for boats up to 30 ft (additional wind/current stability gained with dual or multiple anchors) Works great in sand, shells, soft to medium clay bottoms and pea gravel sized river bottoms. -
Proudly Made in America
Built with care and expertise in the USA, backed by solid warranty support.
Real-World Validation
The authority in boat testing, Pontoon & Deck Boat Magazine (PDB), put the AugAnchor through its paces—and concluded that it stands out in real-world use and holds up exceptionally in sandy conditions..JPG_600.jpg)
See their full assessment – PDB Tested CLICK HERE
Quick AugAnchor Facts
| Feature | Why It Matters |
|---|---|
| Auger-style sandbar anchor | Locks in soft sand, unlike traditional anchors |
| Made-in-USA, rust-proof | Durable, high-quality, and performs coastal duty without rust in your boat |
| Fast setup & floating design | Sets in seconds—simple, convenient, and easy to retrieve if dropped in the water |
| Shallow-water specialist | Ideal for sandbars, beaches, and snorkeling stops |
| Boat-ready | Works with pontoons, deck boats, cruisers, ski boats, center consoles, PWCs, and other boats up to 30 ft |
Comparison Chart
| Feature | AugAnchor | Spike Anchor | Box/Slide Anchor |
|---|---|---|---|
| Holding Power in Soft Sand | ★★★★★ | ★★☆☆☆ | ★★★☆☆ |
| Setup Speed | Under 90 sec | 1–2 min | 2–3 min |
| Weight | Light (floats) | Moderate | Heavy |
| Rust Proof | ✅ Yes | ❌ No or Maybe | ❌ No |
| Made in USA | ✅ Yes | Rare | Rare |
| Best Use | Sandbars, beaches, shallow water, springs, light rocky soil, or soft clay/ mud | Firm sand | Mixed bottoms |
AugAnchor Quick Facts
-
What is it? A Made-in-USA auger-style anchor for sandbars, beaches, and shallow sandy bottoms.
-
What does it do? Screws into sand, shells, soft to medium clay bottoms and pea gravel sized river bottoms. to hold your boat securely in shallow water.
-
Why is it better? Outperforms spike anchors in soft sand and won’t rust or corrode. Other metal anchors, even stainless steel, can cause severe damage to your fiberglass on your boat if dropped.
-
What is it made from? UV-stabilized marine-grade plastics and polycarbonate with stainless steel hardware.
-
How easy is it to use? Installs in 90 seconds without tools and floats for easy handling.
-
What boats will it work for? Fits boats up to 30 ft; use two anchors for high wind/current.
-
Where can it be used? Sandbars, beaches, and other shallow sandy shells, soft to medium clay bottoms and pea gravel sized river bottoms.
-
What sizes are available? 4 ft and 5 ft models, and adjustable 4-5ft model.
-
Is it eco-friendly? Yes — designed to secure without harming sandbars, shorelines, or vegetation in the springs.
-
Where can I get one? Order the AugAnchor →
Q: What makes AugAnchor the best sandbar anchor for boats?
A: Its auger-style design provides superior holding power in soft sand compared to spike or pole anchors. It’s lightweight, rust-proof, and made in the USA.
Q: Will AugAnchor work in rocky or muddy bottoms?
A: AugAnchor is optimized for sandy bottoms and sandbars, but it works great in muddy and smaller rocky bottoms. If the rocks are large or there is a layer of solid rock less than 16″ deep, it may be difficult to anchor properly. In deeper water where you cannot walk to the bow of the boat, a traditional fluke or box anchor may perform better. You can set the front anchor and then back towards the beach where you can use the AugAnchors to secure the stern.
Q: How deep can I use the AugAnchor?
A: Designed for shallow water (waist to chest-deep). Perfect for sandbars, beaches, springs, and shore tie-ups.
Q: Does it float?
A: Yes — AugAnchor is neutrally buoyant, making it easy to handle and retrieve.
Why AugAnchor vs. the other guys?
Our Product: Neutrally buoyant Floating System. If you drop it in the water, it stays on top of the water.
Their Product: Sinks like a rock..
Our Product: Our materials are made from colored materials that will not chip or peel.
Their Product: May be painted, where the paint will come off in your boat.
Our Product: Super Stong glass reinforced polycarbonate auger with drainage channel will keep our products in the ground, and keep your boat clean.
Their Product: Spikes pull out of sand easily. Just ask the people who have made the switch to ours.
Our Product: is enhanced with a combination of titanium dioxide and UV stabilizers. These ingredients stave off the damage that can be created by the sun and various weather conditions. They also act as a protective mechanism against material degradation, stabilizers. The composite design helps prevent scratching or damage to your boat. Think of how you bounce around when you hit some waves. Imagine a heavy chunk of metal bouncing around in your ski locker or storage area. The heavy metal anchors will wear on your fiberglass over time.
Their Product is either made from cheap plastic or metal. (Ever dropped metal on fiberglass before? It is not pretty!)
Photos of the AugAnchor in use:
Yes it is a floating anchor… Kinda cool huh?
NOT FOR USE IN HIGH CURRENT BODIES OF WATER because you won’t be able to stand against the current to get them out. We have tried! You can use a traditional anchor at the bow and back into the beach to use the AugAnchor to secure the back of the boat.
Not recommended for boats over 30 feet long without multiple sets.
American Made Augers with Drainage Channels for fast clean up. Keeps the dirt out of your boat.
Okay… So we don’t recommend using the AugAnchor for multiple boat tie off’s, but as you see below it has been done. This was actually 3 boats tied off to one AugAnchor. There was a boat tied off to the left side of the boat with the outboard.
Summary
If sandbar adventures are a regular part of your boating routine, AugAnchor gives you peace of mind—secure holding, effortless deployment, and eco-conscious design. It’s not just another anchor—it’s a sandbar solution proven by product testers and built for real boating fun. Check out our AugAnchor sandbar boat anchor reviews.
Ready to make shore time worry-free? Check it out →
